ITech IT6723H - Stb; Trg

IEEE488.2 Commands
Copyright © Itech Electronic Co., Ltd. 15
number is the binary weighted of enable register.
Order syntax：
*SRE <NRf>
Parameter：
0~255
Reset value：
Consult *PSC order
Example：
*SRE 128
Quest syntax:
*SRE?
Return parameter：
<NR1>
Reference Order：
*ESE *ESR? *PSC *STB?
*STB?
This order can read the data from status byte register. This order is similar to a
statistics of series, but the equivalent of another instrument orders, it returns
the value the same as series statistics, but after this order is executed, the bit 6
value of status byte register is cleared, while the status bit will not be cleared
when system statistics implemented.
Quest syntax：
*STB？
Parameter：
None
Return parameter：
<NR1>
Reference order：
*CLS *ESE *ESR
*TRG
When the trigger mode of the power supply is BUS order trigger mode, the
order will Generates a trigger signal. The function is the same as
TRIGger[:IMMediate].
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com