ITech IT6723H - System:version; System:error

Status commands
Copyright © Itech Electronic Co., Ltd. 18
Order syntax：
STATus:QUEStionable:ENABle <NRf>
Parameter：
0~255
Reset value：
Consult *PSC order
Example：
STATus:QUEStionable:ENABle 16
Quest syntax：
STATus:QUEStionable:ENABle?
Return parameter：
<NR1>
Reference order：
*PSC
SYSTem:VERSion?
This order can query the version of the SCPI order. Returned value is a string
like “YYYY.V”, In which the YYYY is the year of this version, V is the version.
Order syntax：
SYST:VERS?
Parameter：
None
Return parameter：
<NR2>
Example：
1.00，1991.1
SYSTem:ERRor?
This order is used to query the error information of the power supply. When the
error LED lights on the front panel, it tells us that there is one or more hardware
or order syntax error happened. There are at most 20 groups of error message.
Send the order once will read one error message from the error queue.
1. Error messages follow the FIFO (first-in-first-out) principle. The first error will
be returned first. When you read all the error tips information in the error queue.
The ERROR led will turn off. When error occur the buzzer of the power supply
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com