ITech IT6723H - Chapter5 Trigger Commands; Trigger; Trigger:source

Trigger Commands
Copyright © Itech Electronic Co., Ltd. 22
Chapter5 Trigger Commands
TRIGger
This order is used to generate a trigger signal when trigger source is in BUS
mode. The function of this order is similar to *TRG.
Order syntax：
TRIGger[:IMMediate]
Parameters：
none
Related orders：
*TRG TRIG:SOUR
TRIGger:SOURce
This order is used to choose the source of trigger signal. Power supply can
receive the signal from front pannel i.e by pressing Trigger button. Or receive a
trigger signal by BUS. When you execute order *RST, the trigger mode should
be set in MANUAL.
Order syntax：
TRIG:SOUR <mode>
Parameters：
BUS|MANUAL
Query syntax：
TRIGger:SOURce?
*RST value：
MANUAL
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com