ITech IT8600 Series

Load Commands
Copyright © Itech Electronic Co., Ltd. 40
Query Syntax:
WAVE:CURRent:RANGe?
Returned value
<NR3>
PORT:OUTPut
This command is used to set the output state of external programmable
terminal.
Command syntax:
PORT:OUTPut[:STATe] <bool>
Parameter:
<0|1|OFF|ON>
Query Syntax:
PORT:OUTPut[:STATe]?
Returned value:
0|1
AVERage:COUNt
This command is used to set the average count of functions.
Command syntax:
AVERage:COUNt <NR1>
Parameter:
<1-16>
Query Syntax:
AVERage:COUNt?
Returned value:
NR1
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com