ITech IT8625 - System:communicate:lan:current:address; System:communicate:lan:current:dgateway

System Commands
Copyright © Itech Electronic Co., Ltd. 43
Query Syntax:
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Returned value:
NR1
SYSTem:COMMunicate:LAN:CURRent:ADDRess
This command is used to set the load IP.
Command syntax:
SYSTem:COMMunicate:LAN:CURRent:ADDRess <STR>
Parameter:
<STR>
Unit:
None
Reset value:
192.168.0.211
Query Syntax:
SYSTem:COMMunicate:LAN:CURRent:ADDRess?
Returned value:
<STR>
SYSTem:COMMunicate:LAN:CURRent:DGATeway
This command is used to set the load gateway.
Command syntax:
SYSTem:COMMunicate:LAN:CURRent:DGATeway
Parameter:
<STR>
Unit:
None
Reset value:
192.168.0.1