b. Wrap vinyl electrical tape around the connection starting at the collector and
moving up the cable as shown in the following illustration.
The vinyl electric tape provides a foundation for the butyl rubber sealant, making
it easier to disconnect the cable.
c. Wrap the vinyl electric tape up the coaxial cable overlapping each wrap as shown
in the following illustrations.
Ensure the tape fully covers the cable strain relief.
d. Wrap a layer of butyl rubber sealant over the vinyl electric tape.
Ensure the butyl rubber extends past the vinyl tape and onto the cable jacket.
TDC-0971-011 CCU 100 and Repeater 100 Installation Guide 31
Proprietary and Confidential
To Next Page
Loading...