Installing the remote water disconnect valve
The remote water disconnect valve ships from the supplier with the Itron cable installed. See
the manufacturer's installation instructions for the procedure to mount the disconnect valve
in the pipe close to the pit module.
Caution: Remote disconnect valves must connect to the telemetry (blue port) of the
module.
1. Remove the protective plastic cover from the module's connector ports.
2. Remove the environmental cap from the pit module's telemetry connector (blue).
3. Verify that the connectors are clean and dry.
1. Black register connection
2. Red optional antenna connection
Installing the OpenWay Riva Water Pit Module
OpenWay Riva Water Pit Module Installation Guide TDC-1743-004 26
Proprietary and Confidential
To Next Page
Loading...
