NON VOLATILE MEMORY NON FATAL
ERROR
Checksum error in Flash memory
(see note 1 below)
Incoherence of parameters programmed
(see note 4 below)
Detection of abnormal use of cover
Detection of abnormal use of terminal cover
No internal energy consumed for more than n days
No external energy (pulse inputs) consumed for more
than n days
Vectoriel sum of U vectors greater than prog.
Threshold
Vectoriel sum of I vectors greater than prog.
Threshold
Vectoriel sum of I vectors greater than prog.threshold
during a time greater than duration threshold
Current diversion detected (Meter equipped with
Neutral sensor)
Incoherence of internal clock after power cut
(see note 5 below)
Active signal on control input alarm detected
CURRENT REVERSAL (PHASE 1)
Change of direction of current flow on phase 1
CURRENT REVERSAL (PHASE 2)
Change of direction of current flow on phase 2
CURRENT REVERSAL (PHASE 3)
Change of direction of current flow on phase 3
Meter temperature greater than threshold
Voltage cut on phase 1 longer than threshold
Voltage cut on phase 2 longer than threshold
Voltage cut on phase 3 longer than threshold
Voltage sag on phase 1 longer than threshold
Voltage sag on phase 2 longer than threshold
Voltage sag on phase 3 longer than threshold
Voltage swell on phase 1 longer than threshold
Voltage swell on phase 2 longer than threshold
Voltage swell on phase 3 longer than threshold
Battery voltage level less than threshold
(see note 5 below)
External magnetic field detected by sensors
Demand over threshold detected
CURRENT REVERSAL AGGREGATE
Change of direction of current flow on phase 1 or
phase 2 or phase 3