ITW Dynatec Programming Page 5-25
V6 DCL Touch Screen Controller for Dynamelt M & D ASUs Revised 1/16
Zone Configuration Screen
To go to this screen, press the Zone Configuration button on the Settings Screen.
This screen allows you to enter zone names and to set Offset Temperature and other Control
Settings for each zone.
Zone Configuration Screen Example:
Item Description
1
• Touch a zone input box to go to the Zone Settings.
• Zone is highlighted yellow if an Offset Temperature has been set for this zone.
•
Square bracket is displayed if a custom zone name has been entered for this zone.
2
BACK Button
Press to return to the previous screen.
To Next Page
Loading...
