EasyManua.ls Logo

ITW Dynatec DYNAMELT D25 Series - Lifting the ASU; To Open Hopper Access Cover

Default Icon
234 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 3-2 Installation
Revised 10/14
ITW Dynatec
D15/D25/D45 V6 D CL ASU Manual #20- 63
Front Door
Key
Hopper Access
Side Cover
Key
To Open/ Close Front Panel Box Door
1. Slide up the cover on the covered key lock.
2. Insert the front door key (supplied) into the
covered key lock and turn counter-clockwise to
unlock front panel box door. Remove key.
3. Turn the Main O n/Off switch clockwise, then
counter-clockwise, and pull front door open.
To close and lock:
1. Close front door.
2. Insert front door key and turn clockwise, then
counter-clockwise.
3. Turn Main On/Off Switch counter-clockwise.
4. Remove front door key and return Main On/Off
key to upright position.
To Open Hopper Access Cover
Hopper Access Cover Side Panels
1. With the key (supplied), unlock the lock on the left or right
hopper access cover.
2. Insert a finger in each of the right or left side covers two
latches and push down. The side cover will drop off from the
top.
3. Be aware of the grounding wire attached to the cover.
Main On/Off
switch
Covered
Key Lock
Latch
(1 of 4)
Panel Box
Side Cover
Hopper Access
Cover
Front Panel
Box Door
Lifting the ASU
WARNING
The unit must be lifted by two persons, using proper lifting technique, one per -
son at either end. Securely hold it under its base plate. No belts or hooks should
be used. Never allow anyone to stand on t he ASU.

Table of Contents

Related product manuals