ITW Dynatec DYNAMELT D25 Series - Drive Assembly

Page 10-8 Component Illustrations
Revised 10/14
ITW Dynatec
D15/D25/D45 V6 DC L ASU Manual #20-63
Drive Assembly
Item No.
PN ITW PN
Description
Qty.
1 610101 Base Plate 1
2 680137 Motor, Gear, 240V 3PH, 0.25HP 2
3 610715 M8x1.25 x 20mm Socket Head Cap Screw 8
4 107346 M8 Split Lock Washer 8 or 16
5 610109 Motor Nut Plate 2
6 610108 Motor Mounting Bracket 1 or 2
7 680129 Coupling 2
8 610209 Socket Set Screw Cup Point 4
9 104158 M10- 1,Nut,5,FLG 8
10 104072 M10- 1.5X100, Stud, GRD 8, 8
104073 M10- 1.5X105, Stud, GRD 8, 8 8
114890 M10- 1.5X110, Stud, GRD 8, 8 8
11 100861 Pump (shown for reference only) 2
12 069X064 O-ring, #041 2
13 103518 Socket Head Cap Screw, M10x1.5 x 30mm 4
14 107538 M10 Split Lock Washer 10
15 610169 M10 Flat Washer 10
16 012G009 Block- off Plate 1
17 610701 Hopper D25 1
610722 Hopper D45 1
680510 Hopper D15 1
18 610204 Spacer L=40MM 6
19 104072 M10- 1.5X85, Stud, GRD 8, 8 6
20 610122 Spacer L=8.5MM 6
21 610210 Hex Flange Nut Grade A 6
106244 M8x1.25 x 40mm Socket Head Cap Screw 4 or 8
N07429 M8x1.25 x 30mm Socket Head Cap Screw 10 or 16
106321 M8 Flat Washer 4 or 8
610146 Hexagon Flange Nut, M8x1.25 8 or 12
21 107538 Lock Washer, M10 Split, Hi Collar 8
1
2
3
4
5
6
7
8
9
10
10
10
11
12
13
14
15
16
17
17
17
18
19
20
21
22
23
24
25
26