ITW Dynatec DYNAMELT D25 Series - Pump Options

Page 9-2 Options
Revised 10/14
ITW Dynatec
D SERIES V6 DCL ASU Manuals
P
ump Options
Gear Pumps
For higher tolerances and precision, several gear pumps are available for the ASU. Gear pumps give
better service for continuous applications or applications which require more control over the volume of
adhesive pumped. Gear pumps available are:
Single Pumps:
PN 111253: 0.15 cc/rev single, standard accuracy, cast iron Gear Pump
PN 109908: 0.55 cc/rev single, standard accuracy, cast iron Gear Pump
PN 100860: 1.54 cc/rev single, standard accuracy Gear Pump
PN 100861: 3.18 cc/rev single, standard accuracy Gear Pump
PN 100862: 4.5 cc/rev single, standard accuracy Gear Pump
PN 108875: 8.5 cc/rev single, high accuracy Gear Pump
PN 084E374: 0.584 cc/rev single, high accuracy Gear Pump
PN 084E428: .297 cc/rev single, high accuracy Gear Pump
PN 084E430: 1.168 cc/rev single, high accuracy Gear Pump
PN 084E434: 2.920 cc/rev single, high accuracy Gear Pump
Dual Pumps:
PN 111254: 0.15 cc/rev dual, standard accuracy, cast iron Gear Pump
PN 109909: 0.55 cc/rev dual, standard accuracy, cast iron Gear Pump
PN 100863: 1.54 cc/rev dual, standard accuracy Gear Pump
PN 100864: 3.18 cc/rev dual, standard accuracy Gear Pump
PN 084E389: 0.584 cc/rev dual, high accuracy Gear Pump
PN 084E432: 1.168 cc/rev dual, high accuracy Gear Pump
PN 108874: 2.920 cc/rev dual, high accuracy Gear Pump
Gear Pump Repair Kit: PN 103151
Contains the following items needed to repair the PNs 100860 thru 100864 and the 109908-109909 gear
pumps:
Pressure Relief Valve Repair Kit: PN 109982
Contains the following three items needed to repair the PN 101840 or PN 115540 Pressure Relief Valve:
a PN N00179 O-ring 012, a N01601 O-ring 908 and a N05733 Backup Ring, 012.
PN Description Qty. PN Description Qty.
N00198 O-ring 2 069X064 O-ring 3
018X031 Ball Bearing 5 078F017 Ring, Clip 4
069X061 Seal 1 078I001 Key, Woodruff 1