Page 5-46 ITW Dynatec
Revised 1/16 V6 DCL Touch Screen Controller for Dynamelt M & D ASUs
Security Screen
To go to this screen, press the Security button on the Settings Screen.
This screen allows you to set securities (with password) for access and for changing parameters.
Item Description
• Security unlocked = access to the Security Settings is unlocked and settings may be
changed by all users. The crossed-out Key icon, shown above, means Security is unlocked.
After pressing the Key button, it will disappear and the Security Settings will be locked.
• Security locked = access to the Security Settings is locked and settings may only be
changed by entering a password.
Continued on next page.
To Next Page
Loading...
