ITW Dynatec DYNAMELT D25 Series - Page 139

ITW Dynatec
D SERIES V6 DCL ASU Manuals
Troubleshooting Page 7-5
Revised 10/14
V6 Base Module PN 115734
The V6 Base Module is the main control module of the DynaControl V6 controller. Most of the in-
ternal and external components are connected to the Base module. The Base module is always
the top (first) module on the DIN-rail.
ITW Dynatec recommends using dry contacts for connecting to DynaControl V6!
cont.