ITW Dynatec DYNAMELT D25 Series - Page 190

Page 10-14 Component Illustrations
Revised 10/14
ITW Dynatec
D15/D25/D45 V6 DCL ASU Manual #20-63
PN 100860 1.54 cc/ rev. Single Gear Pump
A
ssembly
PN 100861 3.2 cc/ rev. Single Gear Pump Assembly
Item No.
Part Number
#100860 / #100861
Description
Qty.
012D079 / 012D077 Drive Shaft 1
078I001 Key, Woodruff 1
101626 M5 x 12 SHC Screw 4
069X160 Seal Retainer & Bearing Housing 1
069X061 Lip Seal 1
018X041 Bearing Sleeve 2
100866 / 100867 Front Plate Assembly 1
012D080 / 012D078 Driven Gear Shaft 1
018X031 Ball, 1/8” Diameter (see illustration for quantity) 2-4
012C020 / 012C019 Drive Gear 2
069X064 Pump Seal 2
078F017 Shaft Retaining Ring 4
018X041 Bearing Sleeve, Rear Plate 2
100865 Rear Plate Assembly 1
100908 M4 x 25 SHC Screw 2
104158 M10 Flange Nut 4
104072 M10-1.5 x 100 All Thread 4
107538 Lock Washer Split Hi Collar 4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18