Page 5-8 ITW Dynatec
Revised 1/16 V6 DCL Touch Screen Controller for Dynamelt M & D ASUs
Zone On/Off Switch on the Numeric Entry Keypad
Ite
m Description
1
• Zones can be activated/ deactivated temporarily. Some zones (e.g. Hopper) cannot be
deactivated.
• The switch is colored light green if ON and light red if OFF.
2
By pressing the OK button the entered values will be confirmed and stored in the controller.
The numeric entry keypad closes and you will return to the previous screen.
3
By pressing the ESC button any entered but not yet confirmed values will be discarded and
you will return to the previous screen.
To Next Page
Loading...
