EasyManuals Logo

Iveco Motors Cursor 13 Series User Manual

Default Icon
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
30
Request an efficiency diagnosis of the battery recharge system if when
the engine is running the voltage is lower than 22 V.
Check that terminals and clamps are clean, securely tight and
protected with petroleum oil.
Some battery types are equipped with single cover for inspection
plugs. To access the items, use a lever as shown in the figure.
Air filter/s cleaning
Remove the filter by removing the rod (1) and loosening the screws
(2) shown in the figure.
Blow the filter with compressed and dehumidified air, from inside
to outside (maximum pressure 200 kPa), or wash only with water.
Avoid using detergents; do not use diesel oil.
Replace if tearing is found.
Restore regular operating conditions after having placed the filter in
its housing.
WARNING!
Batteries contain sulfuric acid which is highly caustic and
corrosive. Wear safety gloves and goggles when refilling. If
possible, request specialized staff to perform the check.
Do not smoke nor start flames near the batteries during
checks and make sure the room is suitably ventilated.
04_362_N
1
05_105_C
2
05_007_C
1
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Iveco Motors Cursor 13 Series and is the answer not in the manual?

Iveco Motors Cursor 13 Series Specifications

General IconGeneral
BrandIveco Motors
ModelCursor 13 Series
CategoryEngine
LanguageEnglish

Related product manuals