32
With transfer electric system
(optional)
The above operations can be performed by acting on the push button
located on the electronic module. Fore safety reasons controls are
enabled on only when the key switch is turned to 8A (stop).
Place under the cock (5) a container to collect the exhaust oil.
Open the cock (1) and press (A) towards DISCHARGE, until it is
fully empty.
Connect the cock to the new oil container and press the button
towards CHARGE until filling is completed.
Dispose oil observing current regulations in force.
Close the plug (1).
4
3
A
B
1
2
05_005_C
#(!2'%
$)3#(!2'%
04_036_C
A
5
04_001_C
7
6
To Next Page
Loading...
Need help?
General
