Iveco VECTOR Series User Manual

SECTION 3 - INDUSTRIAL APPLICATION 75
VECTOR 8 ENGINES
Print P2D32V001E Base - April 2006
Symptom
Visible
trouble
Possible cause Repair Notes
Attributable to malfunctioning in the fuel supply:
Insufficient fuel level during operation Check fuel level
The lack of fuel causes trouble to normal system operation mostly when there is a remarkable request of fuel.
Scarce loading
Fuel system clogged before the prefilter
Check if the prefilter priming pump works properly. If the knob of the pump remains aspirated downwards by the depression, disassemble and check prefilter integrity. If the trouble persists have the manufacturer check the system between the tank and the prefilter.
Check accurately and clean fuel system
S
c
a
r
c
e
l
o
a
d
i
n
g
request performances. Possible smoke and roc
k
in
g
Fuel leaks from fittings or pipes after the low pressure pump.
Check the conditions of the pipes and relevant seals.
Abnormal performance
r
o
c
k
i
n
g
Diesel fuel filter clogged
Check the presence of errors (detectable data) with the diagnosis instrument, then replace the filters
Air blow-by before the low pressure pump
Check the conditions of the pipes and relevant seals between the prefilter and the low pressure pump. Check that the bleed screws on the filter are tightened.
With full load performance decay
o
c
c
u
r
s
Oneormoreinjectorsblocked.
The injector that does not work can be found even without diagnosis instruments even if it is completely closed because the relevant high pressure pipes would be cold.
CAUTION: hot engine parts may c ause severe injuries.
occurs.
Air filters clogged as indicated by the sensors.
Request cleaning/replacement of the filters and clean the intake ducts before the filters

Iveco VECTOR Series Specifications

General

Brand	Iveco
Model	VECTOR Series
Category	Engine
Language	English