Iveco VECTOR Series User Manual

SECTION 4 - OVERHAUL AND TECHNICAL SPECIFICATIONS 3
VECTOR 8 ENGINES
Print P2D32V001E Base - April 2006
GENERAL SPECIFICATIONS
Type VECTOR 8
Cycle Four-stroke diesel engine
Power Supercharged with intercooler
Injection Direct
Number of cylinders 8intwobanksat90˚
∅
Bore mm 145
Stroke mm 152
+++..=
Total displacement cm
3
20.080
TIMING
start before T.D.C. A
end after B.D.C. B
16º
25º
start before B.D.C. D
end after T.D.C. C
66º
15º
X
Checking timing
mm
X
mm
Checking operation
mm
X
mm
-
-
0.5
0.5
FUEL FEED
Injection
Type: Bosch
high pressure common rail
Control unit ADEM III
Nozzle type Injectors
Injection sequence 1-3-7-2-6-5-4-8
bar
Injection pressure bar
Variable up to 1600 bar, controlled by the ECU.
The safety valve cuts in at 1850 bar.

Iveco VECTOR Series Specifications

General

Brand	Iveco
Model	VECTOR Series
Category	Engine
Language	English