Figure 8
The fuel filter (1) is fitted in the circuit between the high pressure pump and the low pressure pump behind the engine management
control unit.
The bleed screw (2), the diesel pressure sensor (3) an d the diesel temperature sensor (4) are loc a ted on the mounting.
1. Fuel filter — 2. System bleed screw — 3. Diesel pressure sensor — 4. Diesel temperature sensor —
5. Filter diesel inlet — 6. Diesel outlet from the filter to the high pressure pump.
103477
Fuel filter for G-DRIVE and SPRINKLER applications
SECTION 2 - FUEL
11
VECTOR 8 ENGINES
Print P2D32V001E Base - April 2006
To Next Page
Loading...
