Editing Milling Jobs
112
7.7 Completing / unloading the finished milling job
7.7.1 Completing the milling job and removing the finished restoration
Completing the milling job
All milling jobs have been completed.
You are in the main menu [Cases] in the tab [Finished].
In the list of finished jobs, tap on the job
of your choice.
The milling job is completed.
The material and tool changer will be brought into position and the block holder
containing the milled restoration will be provided at the loading aid.
You can remove the restoration (“Removing the finished restoration at the loading aid”,
page 113).
The app shows a Wizard which will guide you step by step through the removal process.
To Next Page
Loading...