Safety
14
2.6 Working areas, potential hazards and safety measures on the
device
As an operator, you are working at the areas described below.
The device is built according to state-of-the-art technology and recognized technical safety
regulations. Hazardous areas, which cannot be avoided by design, are equipped with
appropriate protective devices. Nevertheless, if the machine is used improperly, there is a
danger to life or risk of injury to the user or third parties. In addition, the device, tools or
workpieces may become damaged.
The working areas, their potential hazards and applicable safety measures are shown below:
3
1
2
To Next Page
Loading...