Ivoclar digital PrograMill One - Page 15

Safety
15
No. Working area Tasks / Work
Safety
measures
Protective effect
1 Milling
chamber
Cleaning when
the device
stands still
Locking the
loading aid.
Access to the
milling chamber
is not possible
during
operation.
• Protection against
crushing and cutting
injuries from the tools
• If the loading aid is
removed, the device will
not start.
• The maintenance access
cannot be opened when
the device is running.
2 Tank Removal of the
tank for filling
with coolant
fluid and filter
exchange
Tank locking
system protects
against removal
of the tank
during
operation
• Protection against
electric shock, health
risks and danger to the
environment due to
leaking coolant fluid
• If the tank is not in place,
the device will not start.
The tank must be
unlocked before
removal. Unlocking is
not possible during
active processing.
3 Maintenance
access with
loading aid
Loading with
tools and blocks
Loading aid
prevents access
into the
housing
Protection against crushing
and cutting injuries from
the tools