Editing Milling Jobs
81
7 Editing Milling Jobs
PrograMill One receives the defined milling jobs from your Ivoclar Digital system solution.
To find out how to design restorations and transfer the milling jobs to PrograMill One, see the
relevant Operating Instructions for your Ivoclar Digital system solution (“Supporting
documents”, page 9).
The following describes how to prepare and execute these milling jobs in the app for
processing by PrograMill One.
7.1 Special procedure to process zirconium oxide
The functionalities to process zirconium oxide will be available in an upcoming software
version.
The processing of “zirconium oxide” after having milled other material types requires a special
procedure, which might differ slightly from the procedure described below.
Technical background: the milling dust of other materials has a negative effect on the shade
of the zirconium oxide blocks.
The scope of delivery of the device includes two tanks:
To Next Page
Loading...