Micro-JLT GNSS™ User Manual
28 © 2019 Jackson Labs Technologies, Inc.
3.3.36 GPS?
This query displays the configuration, position, speed, height and other relevant data of the GNSS
receiver in one convenient location.
3.4 GYRO SUBSYSTEM
This command is not supported in the Micro-JLT GNSS™.
3.4.1 GYRO:MODE <ON|OFF>
This command is not supported in the Micro-JLT GNSS™.
3.4.2 GYRO:TRACE <int> [0,255]
This command is not supported in the Micro-JLT GNSS™.
3.4.3 GYRO:CAL <float,float,float,float,float,float>
This command is not supported in the Micro-JLT GNSS™.
3.4.4 GYRO:CAL:COMPUTE
This command is not supported in the Micro-JLT GNSS™.
3.4.5 GYRO:SENS, GYRO:EFC, and GPS:CAL:RESET
This command is not supported in the Micro-JLT GNSS™.
3.4.6 GYRO:GLOAD?
This command is not supported in the Micro-JLT GNSS™.
3.5 PTIME Subsystem
The PTIME subsystem regroups all the commands related to the management of the time.The list of
the commands supported is the following:
PTIMe:DATE?
PTIMe:TIME?
PTIMe:TIME:STRing?
PTIMe:TINTerval?
PTIMe:OUTput <ON|OFF>
PTIMe:LEAPsecond?
To Next Page
Loading...