Jackson Labs Micro-JLT GNSS - Ptime:date; Ptime:time; Ptime:time:string; Ptime:tinterval

© 2019 Jackson Labs Technologies, Inc. 29
Micro-JLT GNSS™ User Manual
PTIMe:LEAPsecond:PENDing?
PTIMe:LEAPsecond:ACCumulated?
PTIMe:LEAPsecond:DATE?
PTIMe:LEAPsecond:DURation?
PTIMe:STAMp:MODE <OFF|ASYnc|MEMory|OUTput|DIFFer>
PTIMe:STAMp:SOURce <GPS|EXTernal|ALL>
PTIMe:STAMp:DIFFer <ALL|EXT|GPS>
PTIMe:STAMp:FILTer [OFF | REL | DUR | PPS]
PTIMe:STAMp:FILTer:PPSecond <int> [1,100]
PTIMe:STAMp:FILTer:1PPeriod <int> [1,604800]
PTIMe:STAMp:LAST?
PTIMe:STAMp:MEMory?
PTIMe:STAMp:RESET
PTIMe:STAMp?
PTIMe?
3.5.1 PTIMe:DATE?
This query returns the current calendar date. The local calendar date is referenced to UTC time. The
year, month, and day are returned.
3.5.2 PTIMe:TIME?
This query returns the current 24-hour time. The local time is referenced to UTC time. The hour,
minute, and second is returned.
3.5.3 PTIMe:TIME:STRing?
This query returns the current 24-hour time suitable for display (for example, 13:24:56).
3.5.4 PTIMe:TINTerval?
This query is equivalent to the command SYNChronization:TINTerval?
3.5.5 PTIMe:OUTput <ON|OFF>
This command adds support for auto-initialization of time and date between two Jackson Labs Tech-
nologies, Inc. GPSDO units. This allows connecting two units together through the serial port with a
null-modem cable, and having the master unit send time and date information to the slave unit. The
slave unit’s 1PPS reference input can also be driven by the master unit’s 1PPS output signal, by set-
ting the slave unit to external 1PPS sync mode using the SYNC:SOUR:MODE EXT command. This
allows time-synchronization at the nanosecond level between two units which can be useful when