Micro-JLT GNSS™ User Manual
52 © 2019 Jackson Labs Technologies, Inc.
Please see the SYNChronization:HEAlth? command for detailed information on how to decode the
health status indicator values. The Lock State variable indicates one of the states in Table 3.4:
3.10.13 SERVo?
This command returns the result of the following queries:
SERVo:DACGain?
SERVo:EFCScale?
SERVo:PHASECOrrection?
SERVo:EFCDamping?
SERVo:SLOPe?
SERVo:COARSedac?
SERVo:AGINGcompensation?
SERVo:1PPSoffset?
SERVo:TRACe?
SERVo:FASTlock?
SERVo:FALEngth?
Table 3.4 Lock State
Value State
0 OCXO warmup
1 Holdover
2 Locking (OCXO training)
4 [Value not defined]
5 Holdover, but still phase locked (stays in this
state for about 100s after GNSS lock is lost)
6 Locked, and GNSS active
To Next Page
Loading...
