Measured value displays
After return of the power supply, the UMG 96RM-M
shows the first measured value panel from the current
display profile. In order to keep the selection of meas-
ured values to be displayed arranged in a clear manner,
only one part of the available measured values is pre-
programmed for recall in the measured value display by
default. A different display profile can be selected if other
measured values are required to be shown on the UMG
96RM-M display.
Display profile (addr. 037)
Adjustment range: 0 .. 3
0 - Display profile 1, default setting.
1 - Display profile 2, default setting.
2 - Display profile 3, default setting.
User password (addr. 050)
A user password can be programmed in order to impede
any accidental change to programming data. A switch
to the next programming menu can only be made after
entering the correct user password.
No user password is specified in the factory. In this
case, the password menu is skipped and the current
transformer menu is reached directly.
If a user password was programmed, the password
menu will appear with the display “000”.
The first digit of the user password flashes and can
be changed with button 2. The next digit is selected
by pressing button 1 and will begin flashing.
The programming menu for the current transformer can
only be accessed after entering the correct number
combination.
To Next Page
Loading...
