janitza UMG 96RM-CBM User Manual

65
UMG 96RM-P/-CBM
Fig. Operating hours meter of
the measured value display
The UMG 96RM-P/-CBM shows
the number 140.8h in the oper-
ating hours meter. This corre-
sponds to 140 hours and 80 in-
dustrial minutes. 100 industrial
minutes correspond to 60 min-
utes. In this example, 80 indus-
trial minutes therefore represent
48 minutes.
Operating hours meter
The operating hours meter measures the time for which
the UMG 96RM-P/-CBM records and displays measured
values.
The time of operating hours is measured with a resolution
of 0.1 h and is displayed in hours. The operating hours
meter cannot be reset.
Total running time of the comparator
The total running time of a comparator is the sum
of all time for which there is a limit value violation
in the comparator result.
The total running time of the comparator can only
be reset via the GridVis software. The reset is carried out
for all total running times.
Serial number (addr. 754)
The serial number shown by UMG 96RM-P/-CBM
has 6 digits and is part of the serial number displayed
on the nameplate.
The serial number cannot be changed.
Software release (addr. 750)
The software for UMG 96RM-P/-CBM is continuously
improved and expanded. The software version in the
device is marked with a 3-digit number, the software
release. The user cannot change the software release.
Serial number display
Serial number
information
on the nameplate:
XX00-0000

janitza UMG 96RM-CBM Specifications

General

Brand	janitza
Model	UMG 96RM-CBM
Category	Measuring Instruments
Language	English