Janome J30 - What to Do When

1
 Condition Cause Howtox Reference
1. Skipping
Stitches
1. Needleisnotinsertedproperly.
2. Needleisbentorworn.
3. Incorrectlythreaded.
4. Needleorthreadare
 inappropriateforthefabric
being sewn.
5. Sewingonstretchfabric.
6. Inappropriateneedlebar
height.
7. Inappropriateneedletohook
timing.
8. Inappropriateneedletohook
 clearance.
Inserttheneedleproperly.
Changetheneedle.
Rethread.
Usetherecommendedsewingneedle
andthread.
UseaHAx#11bluetipneedle.
Seemechanicaladjustment“Adjustment
ofneedlebarheight”.
Seemechanicaladjustment“Adjustment
ofhooktiming”.
Seemechanicaladjustment“Clearance
betweenneedleandtipoftherotary
hook”.
P. 11
P. 10
P. 12
2. Fabricnot 
moving
1. Incorrectfeeddogheight.
2. Feed dog is in down position.
3. Threadonbottomsideof 
 fabricisjammedup.
4.Feeddogteethareworn.
Adjustthepresserbarleveltomake
thepressurestronger.Seemechanical
adjustment“Feeddogheight”.
Raisethefeeddog.
Makesuretobringbothneedleand
bobbinthreadsunderthefootwhenstart
sewing.
Changethefeeddog.
P. 13
WHAT TO DO WHEN