Janome JUNO E1030 - Front Cover

6
CHANGING EXTERNAL PARTS
FRONT COVER
To remove:
1.Removethefacecoverandbedcover(Refertopages4and5).
2.Removethesetscrewsq(2pcs.).
3.Loosenthesetscreww.
4.Loosenthesetscrewe.
5.Loosenthesetscrewr.
6.Removethesetscrewt.
7. Disengagethefrontcoverandrearcoverhooks.
8.Removethefrontcover y.
9.DisconnectalltheconnectorsfromthecircuitboardA.
NOTE:
Donotdisconnecttheconnectorsbypullingcords.Todisconnect,grasptheconnector,notthecord.
To attach:
9.Followtheaboveproceduresinreverse.See"PRINTEDCIRCUITBOARDACONNECTION"(Page23).
q
w
t
e
r
y