EasyManua.ls Logo

Janome Memory Craft 4400 - Clear Key; Memory Key; Direct Pattern Selection and Number Keys

Janome Memory Craft 4400
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
SEN
• Clear key
If an incorrect pattern is memorized, pressing this key will
immediately clear it (like a backspace key).
• Memory key
When this key is pressed after selecting a pattern, the
pattern will be memorized as many times as the key is
pressed. When the key is pressed after selecting another
pattern, that pattern will be memorized after the
previously memorized pattern.
(The maximum number of memory patterns is 50)
* The following patterns cannot be memorized.
* The Direct mode patterns and buttonholes cannot be
memorized.
• Direct pattern selection and number keys
[Direct pattern selection]
You can select the patterns 1 to 10, also buttonhole
stitches, square buttonhole to keyhole buttonhole when
the mode key is set at the Direct mode.
In A Mode 01~96, the patterns 01 to 10 can be selected by
pressing two-digit numbers.
[Number keys]
Press number keys of the pattern number to select the
desired pattern.
!3
!4
!5
M
C

Table of Contents

Related product manuals