18
• Inserting the bobbin
z
Place the bobbin in the bobbin holder with the thread
running off counterclockwise.
q End of thread
x Guide the thread into the notch on the front side of
the bobbin holder.
w Notch
c Continue to draw the thread lightly. The thread slips
into notch .
Pull out about 15 cm (6˝) of thread.
e Notch
v Attach the hook cover plate.
Check the threading by referring to the chart shown on
the hook cover plate.
r Threading chart
z
x
c
v
q
w
e
B
A
A
B
A
B
r
To Next Page
Loading...
