Janome Memory Craft 4400 - Memory Mode;Buzzer Sound;Multiple; Language Settings

12
M
Memory Mode/Buzzer Sound/Multiple
Language Settings
NORMAL / RESUMPTION Mode
z
Turn on the power switch while pressing the memory
key.
q Memory key
w Power switch
x Select “ 1 ” on the number key to access the
NORMAL/RESUMPTION mode.
You can select the mode by pressing the stitch width
key “+” or “–”.
* NORMAL mode – The last selected pattern setting
will not be recalled when you turn on your machine.
Machine turns on in straight stitch 01, Direct mode.
* RESUMPTION mode – The last sewn pattern setting
will always be recalled when you turn on your
machine. The machine will turn on in the mode of the
sewn stitch pattern.
c Select the desired mode: NORMAL SET or
RESUMPTION SET.
v Press the Memory key.
Buzzer
z
Turn on the power switch while pressing the memory
key.
q Memory key
q
w
e
r
t
y
u
z
x
c
v
x
c
x
c
w Power switch
x Select “ 2 ” by pressing the number key to access the
Buzzer mode.
You can select the mode by pressing the stitch width
“+” or “–”.
c Select desired mode “–” SOUND ON or “+” SOUND
OFF.
v Press the memory key.
* The Buzzer sound setting mark will appear on the
screen when you have set it .
Language selection setting
z
Turn on the power switch while pressing the memory
key.
q Memory key
w Power switch
x Select “ 3 ” by pressing the number key to access
language selection settings.
You can select the desired language by pressing stitch
width “+” or “–”.
c Select the desired language.
e NORMAL / RESUMPTION
r Buzzer sound “ ON ” or “ OFF ”
t Multiple language
v Press Memory key.
y NORMAL / RESUMPTION
u Buzzer sound setting mark
M