105
Applique designs
Patterns SQ14a-75, -76, -77, -127 and -128 are special
designs for machine embroidery applique.
You can attach applique piece to background fabric and
embroider applique design at the same time.
Example:
Applique design SQ14a-76
Prepare background fabric and applique fabric.
Select applique design SQ14a-76 and set the background
fabric to the hoop.
Attach the hoop to the carriage and press the trace key.
Press the key to select trace and baste (single).
Start the machine to mark around embroidery design with
basting stitches.
Cut the applique fabric the same size as the marked area.
Place the applique piece on the marked area and sew the
rst section (color).
NOTE:
Pin the applique piece or use spray adhesive to x the
applique piece in place as necessary.
Remove the hoop from the machine, but do not unhoop
the fabric.
Remove the basting stitches. Cut away the excess
applique fabric as close to the seam line as possible.
Attach the hoop to the machine again.
Sew the remaining sections (colors) of the applique
design.
To Next Page
Loading...
