83
EMBROIDERY MODE
Embroidery Unit
NOTE:
Be sure to provide sufcient space around the machine to 
allow the hoop to move freely.
Do not place anything inside the area shown on the left.
Attaching the embroidery unit
Turn the power switch off.
Remove the cover from the machine.
 
q
 Power switch
 
w
 Cover
NOTE:
Always attach the extension table except when using the 
free-arm hoop (optional item).
Place the embroidery unit on the back side of the 
machine base, matching the small dots as shown.
 
e
 Embroidery unit
 
r
 Small dots
Slide the embroidery unit along the machine to the right 
and push the embroidery unit rmly until it ts securely.
w
r
e
57.5 cm
(22-5/8)
25 cm
(10)
q