13
z
w
Threading the Machine
Press the needle up/down button to raise the take-up lever
to the highest position.
Press the lockout key to lockout the machine. Raise the
presser foot.
q
Lockout key
Pass the thread in order from
z
to
m
.
z
Hold the thread with both hands and pass the thread
into the guide slot.
w
Guide slot
x
Hold the thread with both hands and draw the thread
around the corner of the guide.
Firmly pull the thread toward you along the right
channel until the thread snaps.
e
Corner of the guide
r
Right channel
c
Draw the thread down along the right channel and
around the bottom of the thread guide plate.
Pull the thread up along the left channel.
r
Right channel
t
Thread guide plate
y
Left channel
v
While holding the thread at the spool, rmly dra w the
thread up and to the back of the take-up lever. Draw
the thread forward to draw it into the eye of the take-up
lever.
u
Eye of the take-up lever
b
Then pull the thread down along the left channel
and through the lower thread guide.
i
Lower thread guide
n
Slide the thread behind the needle bar thread guide
from the left.
o
Needle bar thread guide
m
Thread the needle with the needle threader (refer to
the next page).
c r
t
y
v
u
b
m
n
o
i
x
e
r
q
z
x
c
b
m
n
v
To Next Page
Loading...
