33
Manual Stitch Settings
When you press the adjust key, the screen shows
the manual setting window.
q
Adjust key
You can alter the stitch width (or needle drop
position of the straight stitches), stitch length and
needle thread tension.
Press the “+” or “–” key beside the setting you
wish to change.
Altering needle drop position (straight
stitches)
Press the “+” key to move the needle drop
position to the right.
Press the “–” key to move the needle drop
position to the left.
Altering stitch width
Press the “+” key to increase the stitch width.
Press the “–” key to decrease the stitch width.
NOTE:
The adjustable range of patterns U6, U7, U9,
U10 and U11 is 0.0 to 7.0.
Altering stitch length
Press the “+” key to increase the stitch length.
Press the “–” key to decrease the stitch length.
q
To Next Page
Loading...
