25
Function Keys in Ordinary Sewing Mode
q
Adjust key
Press this key to open the manual setting window.
You can adjust the settings of the stitch width, stitch
length, thread tension, and cloth guide position. (refer to
pages 33-35).
w
Twin needle key
Press this key to set the stitch width for twin needle
sewing (refer to page 51).
The key will be grayed out if the selected pattern is not
suitable for twin needle sewing.
e
Program key
Press this key to program a pattern combination.
When this key is pressed, the cursor keys, mirror image
keys, delete key and save le key will appear.
r
Vertical mirror image key
Press this key to sew a vertical mirror image of the
selected pattern (refer to page 52).
t
Horizontal mirror image key
Press this key to sew a horizontal mirror image of the
selected pattern. The key is grayed out if the selected
pattern cannot be turned over (refer to page 52).
y
Delete key
Press this key to delete the pattern from the pattern
combination.
u
Save le key
Press this key to save the pattern combination as a le.
q
w
t
e
r
uy
To Next Page
Loading...
