Janome Memory craft 9900 - Mode Selection

AAASewing.com
22
Mode Selection
When you turn the power switch on, the visual touch
screen will show the ordinary sewing mode after a few
seconds.
The machine is set for straight stitch sewing.
NOTE:
After turning on the power, it takes several seconds to
display the opening window.
(This is the required boot up procedure.)
To switch to the embroidery mode, rst turn the power
switch off then attach the embroidery unit.
Turn the power switch on and press the mode switch key.
q
Mode switch key
A conrmation message
w
will appear. Do not press
the OK key or X key. Open the carriage arm and the
message
e
will appear. Press the OK key to switch to
the embroidery mode and the carriage will move to the
starting position.
To switch back to the ordinary sewing mode, press
the mode switch key and follow the instructions in the
conrmation message.
For embroidery sewing, please refer to embroidery
sewing instruction from page 83.
w
e
q
Janome MC9900 Instruction Manual
Janome Embroidery Machine
www.aaasewing.com
MC9900 Owners Manual/ User Guide