14
Needle threader
NOTE:
The needle threader can be used with a #11 to #16
needle.
Thread size 50 to 90 is recommended.
Make sure the machine is locked out.
Lower the presser foot.
z
Pull down the needle threader knob as far as it will go.
The threader hook comes out through the needle eye
from behind.
q
Threader knob
w
Threader hook
x
Draw the thread from the left to the right, under the left
guide, threader hook and right guide.
Draw the thread around the right guide toward you.
e
Left guide
r
Right guide
c
Raise the threader slowly so a loop of the thread is
pulled up through the needle eye.
t
Thread loop
v
Pull the thread loop to take the thread end out through
the needle eye to the rear.
Press the lockout key to unlock the machine.
NOTE:
The needle threader cannot be used with a twin needle.
z
r
x
c
v
e
q
w
t
To Next Page
Loading...
