115
i
Auto thread cutting (basic)
The machine automatically trims the threads when it
stops to change the thread to the next color when this
option is turned on.
Press the ON/OFF key to turn this function on or off.
i
-1 ON/OFF key
o
Auto thread cutting (advanced)
Press the customize key to open the advanced setting
window.
o
-1 Customize key
o
-2 Jump thread cutting length
You can set the cutting length of jump threads by pressing
the “+” or “–” key. The adjustable range is 3 mm to 30 mm
or “OFF”.
You need to set the cutting length to “OFF” if you turn on
the cutting command option.
o
-3 Thread cutting at color change
The machine automatically trims the threads at the end of
sewing and when it stops to change the thread to the next
color if this option is turned on.
o
-4 Cutting command on/off
If an imported embroidery stitch data le contains a tr im
code (cutting command), turn this option on to trim the
threads at the trim code.
Press the next page key to go to the next menu.
!0
Thread selection
There are 8 types of embroidery thread to choose from.
Press the key of the thread you wish to use. The color
code of the selected brand is shown on the color/part key
along with the name of the color.
If you use imported embroidery stitch data containing
proper thread information, press the retain original color
key to retain this information.
!0
-1 Retain original color key
Press the next page key to go to the next menu.
i
o
o
-1
i
-1
!0
-1
!0
o
-2
o
-3
o
-4
To Next Page
Loading...
