Janome Quilt Maker Pro 18 VERSA - Lubrication Application Details - Continued; Needle Bar and Presser Bar Lubrication; Caged Needle Bearing Lubrication; Presser Bar Slide Lubrication

Janome-America.com
Page 11
5
5
5
3 (orice located a lile
behind the top radius.)
3
5
#1 (Red) OY 68
One drop on the side of the
needle and presser bars. One
drop on each bearing of the
hopping foot (4 places)
#3 (Yellow) GLY 2100
One drop per orice,
arculang link, take-up lever
and needle bar driver
(3 places)
#4 (Green) IsoFlex NCA-15
Inside caged needle bearings
(2 places)
#5 (Orange) GLY 151
Add grease sparingly to the
presser-bar slide and plunger.
Add a small amount between
the stylus and cams of both
the presser-bar liing link
and the hopping-mechanism
liing arm.
(4 places)
3. Lubricaon - Connued
3
1
1
4
4
1
1
1 (Also lubricate two
lower bearings, not shown.)