Janome Quilt Maker Pro 18 VERSA - Lubrication Application Details; Bearing Lubrication Points; Hook Lubrication

Page 10
Quit Maker Pro 18 VERSA
Apply one drop of Lube #6 (Purple), to the
raceway of the bobbin case support two to
three mes per day. This applicaon is based
upon sewing for eight hours of machine me.
If the machine is used less, lubricate the
hook less frequently. Aer the lubricaon
of the hook, it is recommended that one
momentarily sew on scrap material before
resuming the sewing of the quilt. Failure to do
so may result in oil stains on the quilt.
3. Lubricaon
Use Lube #1 (Red) in the seven places shown below, on each side of the sha between the bearing
and the sha. Then use Lube #2 (Blue) between the bearing outer diameter and the bearing
support at each of the seven places.