Janome Quilt Maker Pro 18 VERSA - System Information Screen; Lifetime Stitch Counter; Foot Controller and Sensor Status Icons; Board and Firmware Revision Numbers

Page 50
Quit Maker Pro 18 VERSA
System Informaon Screen
(A) The Lifeme stch counter counts the number of
stches the machine has performed. The Lifeme
count is the total number of stches made since
the machine was built. The Lifeme counter cannot
be reset and should be used as an indicator to
determine when general machine maintenance
should be performed by an authorized Janome
Retailer.
(B) The foot controller icon in the middle of the screen
indicates whether the foot controller is aached. A
red “X” will appear if it is not connected properly.
(C) The le and right sensor icons indicate whether
the sensors are funconing. A red "X" will appear if
sensors are not funconing properly.
(D) Informaon contained in the white boxes at the
boom of the screen idenes the electronics board
revision numbers as well as the rmware revision
numbers of the Quilt Maker Pro 18 Versa machine
the display version, and the sensor version.
Press the Home buon to return to the Main menu
screen or the Tools buon to return to the Diagnoscs
menu screen.
A
D
B
C