Janome Quilt Maker Pro 18 VERSA - Language and Update Functions; Setting the Display Language; Machine and Display Updates

Janome-America.com
Page 49
Language
Set Language
1. Touch the Tools icon in the tool bar. The Tools screen
appears.
2. Press the ag icon to rotate through the language
opons: English, French (Français), German (Deutsch),
and Spanish (Español).
3. When the ag represenng the language you want to
use appears, press the Home buon to return to the
Main screen.
Update
1. Place the USB sck into the port on the right side of
the display as shown.
2. Wait for the color of the selecon buons to change
from gray to blue/green.
3. Select the machine, display, or sensor icon for update
as needed.
4. When the display update buon is selected the screen
will go blank and you will hear three beeps unl the
update has completed and the screen comes back on.
5. Power down the machine between doing the display
and the machine updates.
6. When the machine update buon is selected,the display
screen stays on and a count down number appears above
the machine update buon icon. A four tone signal
sounds when the update on the machine is done.