30
VTX A8 | Rigging Manual
8.2 EXTENSION BAR OVERVIEW
The Array Frame Extension Bar is used to connect the VTX A8 AF Array Frame to the suspension points. One Extension Bar is included
with the VTX A8 AF and additional Extension Bars can be purchased and used depending on the application. The extension is compat-
ible with 5/8-inch shackles; three of which are included. Two shackles are used for suspension and one for cable relief. Two included
quick release pins connect the Extension Bar to the Array Frame.
TIP: The VTX A8 AF Extension Bar is only compatible with 5/8-inch shackles. Three 5/8-inch shackles are included with
each Extension Bar and Array Frame.
CAUTION: Always use high-quality 5/8-inch rigging shackles made by reputable manufacturers. Inspect all rigging
components for potential defects before each use.
CABLE STRAIN RELIEF
LOCATION
ARRAY FRAME
ATTACHMENT POINTS
QUICK RELEASE PIN
STORAGE POSITIONS
SHACKLE ATTACHMENT POINTS
To Next Page
Loading...
