57
VTX A8 | Rigging Manual
12.2 VTX A8 SB SUSPENSION BAR ATTACHMENT TABS
The VTX A8 SB Suspension Bar is designed to connect to the top or bottom of a suspended array of VTX A8s or B18s. When connected
to the bottom (lowest cabinet in the array), the array attachment tabs must be released from their storage positions in order to attach to a
VTX A8 or B18 cabinet. Remove the holding pins on either side of the SB and let the attachment tabs spring to their operating positions.
The attachment tabs can then be pinned to the VTX A8 or B18 cabinet using the cabinet’s quick release pins.
To Next Page
Loading...
