JBL VTX Series - Stacking the VTX A12 VT with the VT-TOP

23
VTX A12 | Rigging Manual
7.4 STACKING THE VTX A12 VT WITH THE VT-TOP
When the VTX A12 VT and VT-TOP are connected, several assemblies can be stacked together for storage.
STEPS:
• Rotate the VT wheels so that the wheels are pointed to the inside of the VT.
• Line up the wheels with the VT-TOP stacking cups and stack the two parts together.
• Repeat until all VTs are stacked together.
CAUTION: Make sure the VT and VT-TOP are pinned together securely before stacking. No more than four VTs
should be stacked together.
1
2
3
3
1
2